Pharmaceutical loads arrive with instructions attached. Good Distribution Practice, GDP, is the framework those instructions come from: how a medicine is stored and moved so that it reaches the pharmacy in the condition it left the factory.
The guidelines behind it (2013/C 343/01) are written for wholesale distributors. Drivers meet them through a transport contract and a training session, which is where a certificate like mine comes from.
What GDP actually covers
The guidelines are wider than temperature. They cover the quality system a distributor has to run: named responsibilities, trained staff, suitable premises and equipment, documented procedures, records that can be checked afterwards, handling of complaints and recalls, and transport.
Transport is one chapter of it, and it is the chapter a driver lives in. The rest of the system exists so that when something goes wrong, somebody can reconstruct what happened without asking the driver to remember a Tuesday in March.
GDP is not the same as a fridge
A refrigerated trailer is equipment. GDP is the set of decisions around it: what range the product needs, how it is loaded, what is recorded, who is told when the record shows a problem.
A company can run a modern trailer with a calibrated recorder and still fail GDP, if nobody knows who decides what to do with a deviation. It can also run an older trailer and pass, if the procedures and records hold. The equipment is necessary and not sufficient.
Who is responsible for what
The guidelines say the wholesale distributor must designate a Responsible Person to implement GDP (§2.2). That person owns the quality system and the decisions about a load that has gone outside its conditions.
A Qualified Person is a different role, in manufacturing: certifying batches before release. Neither role is the driver's.
What the driver has is the part at the trailer: the checks, the records, and the phone call.
Temperature: set point, range, excursion
Every pharmaceutical product has a range it is supposed to sit in. Common ones are chilled products around 2 to 8 °C, ambient products held at a controlled room temperature, and frozen goods well below zero. The range comes from the product and the shipper's instructions, not from the driver's judgement.
The set point is what the trailer is told to hold. The range is what the product tolerates. They are not the same number, and a load can be inside the set point and outside the range if the unit is fighting a hot day.
An excursion is any period outside the range. Twenty minutes during a long tip and an hour while the unit defrosts are both excursions, and both need recording rather than explaining.
Pre-cooling and preparing the trailer
A trailer takes time to pull down. Loading a warm box because the schedule is tight starts the clock with the product already out of range, and no amount of running the unit afterwards undoes the first hour.
The usual preparation is unglamorous: check the unit starts and holds, check the set point before the doors open, look at the door seals, and give the box long enough to reach temperature before the first pallet goes in. If the unit is due a defrost cycle, that is the moment to know about it rather than during a delivery.
Monitoring and calibration
The recorder is evidence, and evidence is only as good as its calibration. Temperature loggers and probes are calibrated at intervals, and the certificate is part of the load's paperwork in the same way the delivery note is.
Two practical consequences. A logger out of calibration is a data problem, not a driving problem, and it is worth telling the office before the delivery rather than after. And the data has to be readable: a recorder nobody can download is a box with a screen.
Seals and chain of custody
The seal number ties the load to the paperwork. It is written at loading, checked at delivery, and any mismatch is reported before the doors are opened rather than after.
A broken or missing seal is not automatically a disaster. It is a decision point, and the decision belongs to the shipper or the consignee. The driver's job is to notice it early and say so.
Loading, delivery, and what the driver checks
The exact procedure belongs to the shipper and varies with the product, the equipment and the contract. The shape is fairly consistent:
- The set point is confirmed before loading.
- The box is at temperature before the doors close.
- The recorder is running and its data can be read at the other end.
- The seal number is checked against the paperwork at both ends.
- At delivery the temperature is read, written on the sheet and handed over.
None of it is difficult. All of it is repetitive, and it is the reason the load is accepted at the dock.
Discrepancies: recorder, sheet, unit, seal
Four things go wrong often enough to plan for.
The recorder and the sheet disagree, because one was read at the wrong moment or the logger clock is off. The unit alarms mid-route, sometimes for a door left open at a fuel stop. The seal number on the note does not match the one on the trailer. The consignee's cold store has no space, and the load sits on a bay with the engine off.
In all four, the driver's move is the same: stop, record, report. What changes is who is called, and that number should be on the paperwork before the first load moves.
The paperwork that travels with the load
Four pieces of paper or their digital equivalents follow a pharmaceutical load: the delivery note or CMR, the temperature record, the seal number, and the calibration certificate for the logger.
The driver usually carries the first two, signs the third and rarely sees the fourth. That does not matter until a deviation, at which point the calibration certificate becomes the difference between data that can be trusted and data that cannot. Knowing it exists, and who holds it, is worth two minutes before the first load.
What the training does not cover
It does not authorise a driver to release a load, reject a batch or sign a quality decision. It does not replace the shipper's own induction, and many run one anyway. And it says nothing about tank work, which is the ADR licence, a separate document with a separate exam.
I hold ADR Basic and Tank and I have not yet driven a tanker. Saying that before a silo fleet plans a first load is more useful than letting them assume otherwise.
Questions before accepting pharmaceutical work
- What range do the products run at, and who sets the set point?
- Who is the Responsible Person, and what number do I ring out of hours?
- What is the instruction when a reading leaves the range: stop, continue, or go to a designated site?
- Who calibrates the loggers, and where is the certificate kept?
- What happens to a load refused at the dock — who authorises the return?
The certificate itself
Mine is PH-02-10419, version 4. It was issued on 8 July 2026 and runs to 8 July 2027. I took the training with Leman.
What the certificate is worth is the hour on the dock when the recorder shows something the sheet does not.
Related
- Four documents every international truck driver should keep an eye on — where ADR and CPC fit against the other dates that stop a start.
- Where do you spend your 45-hour rest when you're working abroad? — the rest rules that decide whether a pharma rotation is workable at all.
- Five kinds of freight, five different jobs — where a fridge sits against the other four.